Dr.sc. Zdenko Tonković, Professor

Master Thesis

Zdenko Tonković: Finite Element for Thick Plates Analysis. Faculty of Mechanical Engineering and Naval Achitecture, University of Zagreb (in Croatian), 1994

Dissertation

Zdenko Tonković: Finite Element for Elastoplastic Analysis of Shell Structure. Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb (in Croatian), 1998

Refereed Papers in CC, SCI Journals

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Numerical Modelling of Damage Accumulation in Cortical Bone Tissue. Tehnical Gazette, Vol 19 (1), 2012, 83-91

Galić, I., Tonković, Z., Vučković, K.: Experimental and numerical investigation of collapse and burst pressures for a valve housing. Strain: An International Journal for Experimental Mechanics, Vol 47 (1), 2011, 519-524

Marenić, E., Tonković, Z., Skozrit, I.: On the Calculation of Stress Intensity Factors and J-Integrals Using the Submodeling Technique. Journal of Pressure Vessel Technology, Vol 132 (4), 2010, 041203-12, doi:10.1115/1.4001267

Galić, I., Vučković, K., Tonković, Z.: Nonlinear Numerical Analysis of Two-Way Globe Valve Housing. Tehnički Vjesnik, Vol 17 (1), 2010, 67-74

Tonković, Z., Skozrit, I., Alfirević, I.: Influence of flow stress choice on the plastic collapse estimation of axially cracked steam generator tubes. Nuclear Engineering and Design, Vol 238 (7), 2008, 1762-1770

Tonković, Z., Sorić, J., Skozrit, I.: On Numerical Modeling of Cyclic Elastoplastic Response of Shell Structures. Computer Modeling in Engineering & Sciences, Vol 26 (2), 2008, 75-90

Z. Tonković, J. Sorić, W.B. Krätzig: On Nonisothermal Elastoplastic Analysis of Shell-Components Employing Realistic Hardening Responses. International Journal of Solids and Structures, Vol 38, 2001, 5019-5039

J. Sorić, Z. Tonković, W.B. Krätzig: A New Formulation of Numerical Algorithms for Modeling of Elastoplastic Cyclic Response of Shell-Like Structures. Computers & Structures, Vol 78, 2000, 161-168

I. Heidl, Z. Tonković: Numerical Analysis of Thin-Walled Beam Structures. Strojarstvo (Journal for the Theory and Application in Mechanical Engineering), Vol 36, 1994, 49-53

Submitted Papers to CC, SCI Journals

Marenić, E., Sorić, J., Tonković, Z.: Nano-submodelling technique based on overlapping domain decomposition method. Transactions of FAMENA, 2012 - submitted (poslan na objavu)

Čanžar, P., Tonković, Z., Bakić, A., Kodvanj, J.: Microstructure influence on low-cycle fatigue behaviour of nodular cast iron. Fatigue & fracture of engineering materials & structures, 2011 - submitted (poslan na objavu)

Perić, M., Tonković, Z., Karšaj, I.: Numerical Simulation of a Welding Process using a Shell/3D Modeling Technique. Computers & Structures, 2011 - submitted (poslan na objavu)

Refereed Papers in other Journals

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Modelling of Nonlinear Creep and Recovery Behaviour of Cortical Bone. Key Engineering Materials, vol 488-489, 2012, 186-189

Marenić, Eduard, Sorić, Jurica, Tonković, Zdenko: Numerical modeling of atomistic-to-continuum coupling based on bridiging domain method. Proceedings in applied mathematics and mechanics (PAMM), vol 11, 1, 2011, 539-540

Čanžar, P., Tonković, Z., Bakić, A., Kodvanj, J.: Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron. Key Engineering Materials, vol 488-489, 2011, 182-185

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Numerical Modelling of Viscoelastic/damage Behaviour of Cortical Bone. Key Engineering Materials, vol 417-418, 2010, 273-276

Skozrit, I., Tonković, Z.: On Numerical Analysis of Creep Fracture Behaviour of Medium Density Polyethylene. Key Engineering Materials, vol 417-418, 2010, 233-236

Čanžar, P., Tonković, Z., Kodvanj, J., Bakić, A., Tomičević, Z.: Modelling of cyclic plasticity and crack propagation. Key Engineering Materials, vol 452-453, 2010, 825-828

Tóth, L., Kozak, D., Lenkey, B.G., Tonković, Z., Čanađija, M.: Risk Based Approach - The Interface Between Economists and Engineers in Structural Integrity Assessment. Nafta: exploration, production, processing, petrochemistry, vol 3, 2008, 129-139

Skozrit, I., Tonković, Z., Kozak, D., Čanađija, M., Tóth, L.: A J-integrál és a képlékeny tönkremenetel számítására használt összefüggés szerepe a felületi repedést tartalmazó vastag falú cső integritásának becslésénél (J-integral and plastic collapse loads expressions for integrity assessment of thick tubes containing surface cracks). GÉP, vol 8-9, 2007, 95-99

Tonković, Z., Skozrit, I., Sorić, J.: Numerical Modelling of Deformation Responses of Cracked Tubes. Transactions of FAMENA, vol 29, 1, 2005, 31-38

Čanađija, M., Kozak, D., Tonković, Z., Tóth, L., Lenkey, B.G.: Spregnuta termomehanika: oblici sprege i numerički aspekti. Engineering Review, vol 24, 2004, 1-10

Sorić, J., Tonković, Z.: On numerical modelling of cyclic bending responses of thin-walled structural components. Transactions of FAMENA, vol 25, 2001, 5-24

Z. Tonković, J. Sorić, I. Heidl: A Formulation of Assumed Strain Nine-Node Plate Element Based on Reissner-Mindlin Type Kinematic Model. International Journal for Engineering Modelling, vol 10, 1997, 47-56

Z. Tonković, I. Heidl: A Nine-node Mindlin-Reissner Plate Finite Element. Proceedings of the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, vol ’95, 1995, 45-52 (in Croatian)

I. Heidl, Z. Tonković: Finite Element for Thick Plates Analysis. Proceedings of the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, vol ’94, 1994, 13-20 (in Croatian)

I. Heidl, Z. Tonković: On Numerical Analysis of Thin-walled Beam Structures. Proceedings of the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 1992, vol ’92, 1992, 29-36 (in Croatian)

Submitted Papers to other Journals

Tonković, Z., Skozrit, I., Marenić, E., Lesičar, T.: Procjena cjelovitosti zavarenih spojeva u posudi pod tlakom. Zavarivanje, 2011 - submitted (poslan na objavu)

Refereed Papers in Proceedings

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Modelling of Nonlinear Creep and Recovery Behaviour of Cortical Bone. Proceedings of the 10th International Conference on Fracture and Damage Mechanics, Tonković, Z., Aliabadi, M.H. (eds.), Dubrovnik, Croatia, 19-21 September 2011, 186-189

Čanžar, P., Tonković, Z., Bakić, A., Kodvanj, J.: Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. Proceedings of the 10th International Conference on Fracture and Damage Mechanics, Tonković, Z., Aliabadi, M.H. (eds.), Dubrovnik, Croatia, 19-21 September 2011, 182-185

Čanžar, P., Tonković, Z., Drvar, N., Bakić, A., Kodvanj, J., Sorić, : Experimental Investigation and Modelling of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. Proceedings of Eighth International Conference on Structural Dynamics EURODYN 2011, G. De Roeck, G. Degrande, G. Lombaert, G. Muller (eds.), Leuven, Belgium, 4-6 July 2011, CD-ROM edition

Čanžar, P., Tonković, Z., Bakić, A., Kodvanj, J.: Low-cycle Fatigue Behaviour of Nodular Cast Iron: Experiments and Numerical Modelling. Proceedings of 2nd International Conference of Engineering Against Fracture, Pantelakis, S., Ritchie, R. (eds.), Mykonos, Greece, 22-24 June 2011, CD-ROM edition

Galić, I., Tomičević, Z., Tonković, Z.: Fatigue testing of cast steel GP240GH. Proceedings of 2nd International Conference of Engineering Against Fracture, Pantelakis, S., Ritchie, R. (eds.), Mykonos, Greece, 22-24 June 2011, CD-ROM edition

Skozrit, I., Tonković, Z., Bakić, A., Kodvanj, J.: Eksperimentalno i numeričko modeliranje zareznog djelovanja u polietilenu. Zbornik radova Četvrtog susreta hrvatskog društva za mehaniku, Živić, M. (ur.), Slavonski Brod, Hrvatska, 10 June 2011, 137-142

Lovrenić-Jugović, M., Tonković, Z.: Numeričko modeliranje procesa puzanja kortikalnoga koštanoga tkiva. Zbornik radova Četvrtog susreta hrvatskog društva za mehaniku, Živić, Marija (ur.), Slavonski Brod, Hrvatska, 10 June 2011, 75-80

Marenić, Eduard, Sorić, Jurica, Tonković, Zdenko: Numeričko modeliranje prijelaza s atomističkog modela na razinu mehanike kontinuuma. Četvrti susret Hrvatskog društva za mehaniku, M. Živić, Slavonski Brod, 10 June 2011, 93-98

Lesičar, T., Tonković, Z., Sorić, J.: Mikromehaničko modeliranje procesa deformiranja. Zbornik radova Četvrtog susreta hrvatskog društva za mehaniku, Živić, Marija (ur.), Slavonski Brod, Croatia, 10 June 2011, 69-74

Čanžar, P., Tonković, Z., Bakić, A., Kodvanj, J.: Eksperimentalno i numeričko modeliranje zamornog ponašanja nodularnog lijeva. Zbornik radova Četvrtog susreta hrvatskog društva za mehaniku, Živić, Marija (ur.), Slavonski Brod, Croatia, 10 June 2011, 27-32

Tonković, Z., Skozrit, I., Lesičar, T.: Procjena integriteta opreme pod tlakom. Zbornik radova Osmog hrvatskog seminara o tlačnoj opremi, Švaić, S. (ur.), Zagreb, Hrvatska, 19 May 2011, 73-83

Marenić, E., Sorić, J., Tonković, Z.: Ghost forces in concurrent atomistic-to-continuum coupling based on Bridging domain method. 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics, G. Brenn, G.A. Holzapfel, M. Schanz, O. Steinbach, Graz, Austria, 18-21 April 2011, 246-247

Čanžar, P., Tonković, Z., Kodvanj, J., Bakić, A., Tomičević, Z., Surjak, : Fatigue crack initiation and propagation modelling using a cyclic plasticity constitutive formulation. 18th European Conference on Fracture, D. Klingbeil, M. Vormwald, K.-G. Eulitz, Dresden, Germany, 30 August - 3 September 2010, CD-ROM edition

Perić, M., Tonković, Z., Karšaj, I.: Numerical analysis of Residual Stresses in Welding Process Using Shell to Solid Coupling Technique. International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems, -, Istanbul, Turkey, 11-17 July 2010, CD-ROM edition

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Numeričko modeliranje akumuliranja oštećenja u koštanom tkivu. Zbornik radova Trećeg susreta Hrvatskoga društva za mehaniku, Bošnjak-Klečina, Mirjana (ur.), Osijek, Hrvatska, 18 June 2010, 47-52

Skozrit, I., Tonković, Z.: Numeričko modeliranje pukotina u polimernim materijalima. Zbornik radova Trećeg susreta Hrvatskoga društva za mehaniku, Bošnjak-Klečina, Mirjana (ur.), Osijek, Hrvatska, 18 June 2010, 71-76

Čanžar, P., Tonković, Z., Kodvanj, J., Bakić, A., Drvar, N., Tomičević: Eksperimentalno i numeričko modeliranje zamornog ponašanja materijala. Zbornik radova Trećeg susreta Hrvatskoga društva za mehaniku, Bošnjak-Klečina, Mirjana (ur.), Osijek, Hrvatska, 18 June 2010, 11-16

Tonković, Z., Sorić, J., Marenić, E.: Numerička analiza tankostjene čelične boce za ukapljeni naftni plin. Zbornik radova Sedmog hrvatskog seminara o tlačnoj opremi, S. Švaić (ur.), Zagreb, Croatia, 20 May 2010, 95-105

Tonković, Z., Sorić, J., Karšaj, I., Perić, M.: Numerical modeling of welding process. 5. International Scientific-Professional Conference SBW 2009, Robotization and automation in welding and other techniques, Samardžić, Ivan. (ur.), Slavonski Brod, Croatia, 11-13 November 2009, CD-ROM edition

Skozrit, I., Tonković, Z.: Numerical Analysis of Creep Fracture Behaviour of Medium Density Polyethylene. Proceedings of the 6th International Congress of Croatian Society of Mechanics, Smojver, I., Sorić, J. (eds.), Dubrovnik, Croatia, 30 September - 2 October 2009, CD-ROM edition

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I., Pustaić, D.: On numerical modelling of nonlinear behaviour of cortical bone. Proceedings of the 6th International Congress of Croatian Society of Mechanics, Smojver, I., Sorić, J. (eds.), Dubrovnik, Croatia, 30 September - 2 October 2009, CD-ROM edition

Skozrit, I., Tonković, Z.: On Numerical Analysis of Creep Fracture Behaviour of Medium Density Polyethylene. Proceedings of the 8th International Conference on Fracture and Damage Mechanics, Aliabadi, M.H., Abela, S., Baragetti, S., Guagliano, M., Lee, H.-S. (eds.), San Giljan, Malta, 8-10 September 2009, 233-236

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Numerical modelling of viscoelastic-damage behaviour of cortical bone. Proceedings of the 8th International Conference on Fracture and Damage Mechanics, Aliabadi, M.H., Abela, S., Baragetti, S., Guagliano, M., Lee, H.-S. (eds.), San Giljan, Malta, 8-10 September 2009, 273-276

Skozrit, I., Tonković, Z.: Numerical Modelling of Creep Fracture Behaviour of Medium Density Polyethylene (MDPE). Proceedings of the 12th International Conference on Fracture, M. Elboujdaini (ed.), Ottawa, Canada, 12-17 July 2009, CD-ROM edition

Perić, M., Tonković, Z., Karšaj, I.: Numerical analysis of residual stresses in welding process using submodelling technique. 62nd Annual Assembly and International Conference of the International Institute of Welding, -, Singapore, Singapore, 12-17 July 2009, CD-ROM edition

Tonković, Z., Sorić, J., Skozrit, I., Marenić, E.: Primjena metode konačnih elemenata za procjenu cjelovitosti posuda pod tlakom. Zbornik radova Šestog hrvatskog seminara o tlačnoj opremi, Švaić, S. (ur.), Zagreb, Hrvatska, 14 May 2009, 81-91

Skozrit, I., Tonković, Z.: Numeričko modeliranje vremenski ovisnog ponašanja polietilena. Zbornik radova Drugog susreta Hrvatskoga društva za mehaniku, Marović, P., Galić, M., Krstulović-Opara, L. (ur.), Split, Hrvatska, 12-13 September 2008, 73-78

Marenić, E., Tonković, Z., Skozrit, I.: Primjena metode podmodeliranja u analizi geometrijskih diskontinuiteta. Zbornik radova Drugog susreta Hrvatskoga društva za mehaniku, Marović, P., Galić, M., Krstulović-Opara, L. (ur.), Split, Hrvatska, 12-13 September 2008, 49-54

Galić, I., Tonković, Z., Vučković, K.: Eksperimentalna i numerička analiza plastičnog kolapsa kućišta ventila. Zbornik radova Drugog susreta Hrvatskoga društva za mehaniku, Marović, P., Galić, M., Krstulović-Opara, L. (ur.), Split, Hrvatska, 12-13 September 2008, 13-18

Skozrit, I., Tonković, Z.: Creep Fracture Behavior of Medium Density Polyethylene. Proceedings of 17th European Conference of Fracture, Pokluda, J., Lukaš, P. (ed.), Brno, Czech Republic, 2-5 September 2008, CD-ROM edition

Skozrit, I., Tonković, Z.: On Numerical Modelling of Creep Behaviour of Medium Density Polyethylene. Proceedings of 8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering, Schrefler, B. A., Perego, U. (ed.), Venice, Italy, 30 June - 4 July 2008, CD-ROM edition

Skozrit, I., Tonković, Z.: Fracture Analysis of Medium Density Polyethylene. Proceedings of 1st International Conference of Engineering Against Fracture, Pantelakis, S. (ed.), Patras, Greece, 28-30 May 2008, CD-ROM edition

Galić, I., Tonković, Z., Vučković, K.: Experimental and Numerical Investigation of Failure Pressure of Valve Housing. Proceedings of 1st International Conference of Engineering Against Fracture, Pantelakis, S. (ed.), Patras, Greece, 28-30 May 2008, CD-ROM edition

Tonković, Z., Sorić, J.: On Elastoplastic Cyclic Response of Shell-Like Structures. Proceedings of Special Workshop: Advanced Numerical Analysis of Shell-like Structures, J. Sorić, F. Gruttmann, W. Wagner (eds.), Zagreb, Croatia, 26-28 September 2007, 295-302

Skozrit, I., Tonković, Z., Lovrenić-Jugović, M.: Analiza pukotina u metalnim i polimernim materijalima. Zbornik radova Prvog susreta Hrvatskoga društva za mehaniku, Čanađija, M. (ur.), Rijeka, Hrvatska, 29 June 2007, 161-166

Lovrenić-Jugović, M., Tonković, Z., Skozrit, I.: Spregnuti modeli viskoelastičnosti i oštećenja za analizu koštanog tkiva. Zbornik radova Prvog susreta Hrvatskoga društva za mehaniku, Čanađija, M. (ur.), Rijeka, Hrvatska, 29 June 2007, 139-144

M. Blažetić, J. Sorić, Z. Tonković: Rješavanje problema deformiranja grafitne nano-ploče. Zbornik radova Prvog susreta Hrvatskoga društva za mehaniku, M. Čanađija (ur.), Rijeka, Hrvatska, 29 June 2007, 31-36

Skozrit, I., Tonković, Z., Kozak, D., Čanađija, M.: Influence of Chosen Expression for J-integral and Plastic Collapse Loads on Structural Integrity Assessment of Surface Cracked Thick-walled Tubes. Proceedings of the 7th Conference on New Trends in Fatigue and Fracture Meeting, Toth, L., Pluvinage, G. (ed.), Miskolctapolca, Hungary, 3-4 May 2007, CD-ROM edition

R. Cepika, Z. Tonković, M. Blažetić: Implementation of Visual Basic applications and tools in finite element analysis. CIMOS-ov dan raziskav, 2. Zbornik referatov, Cimos d.d. Koper, Petar Orbanič (ed.), Koper, Slovenija, 17 November 2006, 187-192

Skozrit, I., Tonković, Z., Alfirević, I.: Plastic Collapse Analysis of Surface Cracked Steam Generator Tubes. Proceedings of the 5th International Congress of Croatian Society of Mechanics, Matejiček, F. (ur.), Trogir, Croatia, 21-23 September 2006, CD-ROM edition

Skozrit, I., Tonković, Z., Sorić, J.: Numerical Analysis of Surface Cracks in Steam Generator Tubes. Proceedings of the 16th European Conference of Fracture, Gdoutos, E. E. (ed.), Alexandroupolis, Greece, 3-7 July 2006, CD-ROM edition

Kozak, D., Tóth, L., Tonković, Z., Lenkey, B.G., Čanađija, M., Szabolcs, : New design of repair welded joints based on materials heterogeneity. Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries, Kljajin, M.; Katalinic, B.; Budic, I., Slavonski Brod, Croatia, 21-24 September 2005, 123-128

Tonković, Z., Skozrit, I., Sorić, J.: A Contribution to Assessment of Steam Generator Tubes Integrity. Proceedings of the 11th International Conference on Fracture, Carpinteri, A. (ed.), Turin, Italy, 20-25 March 2005, CD-ROM edition

Tonković, Z., Skozrit, I.: Elastoplastic Analysis of External Axial Surface Cracks in Tubes. Proceedings of the ICCES’04, International Conference on Computational & Experimental Engineering and Sciences, Tadeu, A., Atluri, S. N. (eds.), Madeira, Portugal, 26-29 July 2004, CD-ROM edition

J. Sorić, Z. Tonković, I. Karšaj: On Numerical Modeling of Elastoplastic Responses of Shell Structures. Proceedings of NATO Advanced Research Workshop: Multi-physics and Multi-scale Computer Models in Non-linear Analysis and Optimal Design of Engineering Structures under Extreme Conditions, A. Ibrahimbegovic, B. Brank (eds.), Bled, Slovenia, 13-17 June 2004, CD-ROM edition

Tonković, Z., Skozrit, I., Sorić, J.: Elastoplastic Analysis of Circumferential Cracks in Pipes. Proceedings of the 4th International Congress of Croatian Society of Mechanics, Matejiček, F. (ur.), Bizovac, Croatia, 18-20 September 2003, CD-ROM edition

Tonković, Z., Sorić, J., Skozrit, I.: Elastoplastic Fracture Analysis of Through-wall Cracked Cylindrical Shells. Proceedings of the ICCES’03, International Conference on Computational & Experimental Engineering and Sciences, Atluri, S. N. (ed.), Corfu, Greece, 24-29 July 2003, CD-ROM edition

Z. Tonković, J. Sorić: Fracture Analysis of Cracked Cylindrical Shells under Internal Pressure and Bending. Proceedings of The Sixth International Conference on Computational Structures Technology, B.H.V. Topping, Y. Bittnar (eds.), Prague, Czech Republic, 4-6 September 2002, CD-ROM edition

J. Sorić, Z. Tonković: Computer Techniques for Simulation of Non-isothermal Elasto-plastic Shell Responses. Proceedings of the First M.I.T. Conference on computational Fluid and Solid Mechanics, K.J. Bathe (ed.), Cambridge, USA, 12-14 June 2001, CD-ROM edition

Z. Tonković, J. Sorić, W.B. Krätzig: Numerical Simulation of Nonisothermal Cyclic Bending Responses of Thin-Walled Structural Components. Proceedings of the 3rd Congress of Croatian Society of Mechanics, T.D. biro Zagreb, P. Marović (ed.), Cavtat, Croatia, 28-30 September 2000, 93-100

Z. Tonković, J. Sorić, W.B. Krätzig: On Numerical Modelling Of Nonisothermal Cyclic Elastoplastic Response of Thin-Walled Structural Elements. Proceedings of The European Congress on Computational Methods In Applied Sciences And Engineering - ECCOMAS, E. Onate, G. Bugeda, B. Suarez (eds.), Barcelona, Spain, 11-14 September 2000, CD-ROM edition

J. Sorić, Z. Tonković: On Cyclic Elastoplasticity in Shell Structures. Proceedings of the Fourth International Colloquium on Computation of Shell & Spatial Structures IASS-IACM, M. Papadrakakis, A. Samartin, E. Onate (eds.), Chania - Crete, Greece, 5-7 June 2000, CD-ROM edition

J. Sorić, Z. Tonković, W.B. Krätzig: An Efficient Modelling of Nonisotermal Elastoplastic Response of Shell Structures. Proceedings of the European Conference on Computational Mechanics, W. Wunderlich (ed.), Munich, Germany, 31 August - 3 September 1999, CD-ROM edition

J. Sorić, Z. Tonković, W.B. Krätzig: On Numerical Simulation of Cyclic Elastoplastic Deformation Processes of Shell Structures. Advances in Finite Element Procedures and Techniques, B.H.V. Topping (ed.), Edinburgh, Scotland, 18-20 August 1998, 221-228

J. Sorić, Z. Tonković, I. Smojver: On Numerical Modelling of Nonlinear Responses of Shell-like Mechanical Structures. Proceedings of the 5th International Design Conference, D. Marjanovic (ed.), Dubrovnik, Croatia, 19-22 May 1998, 207-214

Z. Tonković, I. Heidl: A new Nine-node Quadrilateral Element for Analysis of Thick and Thin Plates. Proceedings of The 2nd Congress of Croatian Society of Mechanics, P. Marović (ed.), Supetar - Brač, Croatia, 18-20 September 1997, 109-116

J. Sorić, Z. Tonković, U. Montag: Efficient Modelling of Nonlinear Hardening Responses for Elastoplastic Shell Analyses. Proceedings of The 2nd Congress of Croatian Society of Mechanics, P. Marović (ed.), Supetar - Brač, Croatia, 18-20 September 1997, 69-76

Z. Tonković, J. Sorić, I. Heidl: On Mixed Interpolation of Eight-node Shear-bending Plate Element. Proceedings of The 1st Congress of Croatian Society of Mechanics, N. Vranković (ed.), Pula, Croatia, 14-17 September 1994, 39-46

Books:

I. Alfirević, J. Saucha, Z. Tonković, J. Kodvanj, An introduction to Mechanics I: Statics of rigid bodies, Golden Marketing Tehnička knjiga, Zagreb 2011. (in Croatian).

I. Alfirević, J. Saucha, Z. Tonković, J. Kodvanj, An introduction to Mechanics II: Applied statics, Golden Marketing Tehnička knjiga, Zagreb 2011. (in Croatian).

D. Pustaić, H. Wolf, Z. Tonković, Mechanics III, Golden Marketing, Zagreb 2005., (in Croatian).

Contributions in books:

Galić, I., Tonković, Z., Vučković, K.: Experimental and Numerical Investigation of Failure Pressure of Valve Housing, Engineering Against Fracture, Pantelakis, Spiros; Rodopoulos, Chris (Eds.), pp. 487-497, Springer, 2009.

Skozrit, I., Tonković, Z.: Fracture Analysis of Medium Density Polyethylene, Engineering Against Fracture, Pantelakis, Spiros; Rodopoulos, Chris (Eds.), pp. 455-464, Springer, 2009.

W.B. Krätzig, U. Montag, J. Sorić, Z. Tonković: Computer simulation of nonisothermal elastoplastic shell responses, Advances in Mechanics of Plates and Shells, Durban, D., Givoli, D., Simmonds, J. G. (eds.), Kluwer Academic Publishers, Dordrecht 2001, 167-180.