Laboratorij za procesna mjerenja

Zavod za termodinamiku, toplinsku i procesnu tehniku
  • O nama
  • Obavijesti
  • Zaposlenici
  • Laboratoriji
    • Laboratoriji
    • Laboratorij za energetsku učinkovitost
    • Laboratorij za procesna mjerenja
    • Laboratorij za termodinamiku
    • Laboratorij za toplinu i toplinske uređaje
  • Projekti
    • Projekti
    • Istraživački projekti
    • Stručni projekti
  • Nastava
Na ovoj stranici koristimo kolačiće kako bi korisnici mogli pristupati svojim korisničkim računima te za potrebe analize pristupa fakultetskim stranicama. Nastavljanjem korištenja ove stranice pristajete na kolačiće.

Laboratorij za procesna mjerenja


Laboratorij za procesna mjerenja (LPM) ima više od 50 godina iskustva u nastavnom, znanstvenom i stručnom radu na području teorije i primjene mjerenja toplinskih i procesnih veličina kao što su:

  • temperatura,
  • tlak,
  • vlažnost,
  • protok,
  • brzina strujanja fluida,
  • masa,
  • toplinska energija,
  • toplinska svojstva tvari.
Laboratorij je nacionalni umjerni laboratorij za temperaturu, tlak i vlažnost imenovan od Državnog zavoda za mjeriteljstvo (DZM-a) te akreditirani umjerni laboratorij prema normi ISO/IEC 17025 od 2002. godine. Opseg akreditacije i najbolja mjeriteljska sposobnost javno su dostupni na linku.

Na više od 400 m2 LPM posjeduje najmoderniju mjernu i računalnu opremu, a djelatnici laboratorija boravili su na brojnim znanstvenim i stučnim usavršavanjima na inozemnim institucijama i objavili više od 150 znanstvenih i stručnih radova.

Laboratorij je nasljednik Laboratorija za toplinska mjerenja, osnovanog 1960. godine u okviru Visoke tehničke škole.

Djelatnost LPM-a uključuje:

1. Predavanja i vježbe na kolegijima FSB-a:
  • Toplinska i procesna mjerenja,
  • Mjerenja u zrakoplovstvu II,
  • Mjerenja u energetici,
  • Primjenjene računalne metode,
  • Teorija i tehnika mjerenja,
  • Mjeriteljstvo,
  • Toplinska, procesna i mehanička mjerenja,
  • Mjeriteljstvo i dinamička mjerenja.

2. Razvojni, eksperimentalni i znanstveni rad kroz sudjelovanje u znanstvenoistraživačkim i tehnološkim projektima:

2.1. Projekti Ministarstva znanosti, edukacije i sporta RH:

Vrsta projekta
Broj projekta
Naslov Godina
Znanstveni
No. 120007
Razvoj nacionalnog etalona temperature 1998.
Znanstveni
No. 0120028
Razvoj nacionalnog etalona temperature od krutišta cinka do krutišta aluminija 2002.
Tehnologijski
No. TP-02/0120-15
Mjerni sustav za ispitivanje termoparova 2002.

2.2. EU, EURAMET  i EMPIR projekti:

Broj projekta Naslov Godina
(početak)
EMPIR 18RPT03 - MetForTC
Traceable measurement capabilities for monitoring thermocouple performance 2019.
EMPIR 15RPT03 - HUMEA
(HORIZON 2020)
Expansion of European research capabilities in humidity measurements 2016.
EMPIR ENV58 - METEOMET 2
(HORIZON 2020)
Metrology for essential climate variables 2016.
EMPIR 14RPT05 - EURA -THERMAL
(HORIZON 2020)
Developing traceable capabilities in thermal metrology 2015.
IBF - Support to IPA - Free Movement of Goods Bilateral comparison between HMI/FSB-LPM and KMA in the thermometry field - Calibration of Thermocouple by Comparison in the Temperature Range from 0ºC to 1000°C 2015.
IBF - Support to IPA - Free Movement of Goods Technical training for the employees of Kosovo Metrology Agency related to establishment, development and implementation of the national standards for pressure, temperature and humidity. 2015.
EURAMET Project N° 1414 Comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa 2015.
EURAMET T-K9 Regional key comparison: ITS-90 SPRT Calibration from the Ar TP to the Zn FP 2015.
EURAMET Project N° 1189 Comparison of the realizations of the relative humidity in the range from 10% to 95% at temperatures from -10 °C to 70 °C 2012.
EURAMET Project N° 1145 Bilateral comparison in fixed points of Argon 2012.
EURAMET Project N° 1179 Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa 2011.
EURAMET Project N° 1170 Comparison in the negative gauge pressure range from -950 to 0 hPa 2010.
EURAMET Project N° 1125 Evaluation of cross-float measurements with pressure balances 2010.
EURAMET Project N° 1167 Comparison of the realizations of the ITS-90 over the range of 83.8058 K to 692.677 K 2010.
EURAMET Project N° 717 Comparison in dew-point temperature (high range) 2010.
EURAMET Project N° 1144 Bilateral comparison in fixed points of Zn, Sn, Ga and Hg 2009.
EURAMET Project N° 1143 Bilateral comparison in fixed points of Ag and Cu using Pt/Pd thermocouple 2009.
EURAMET Project N° 1127 Bilateral comparison of triple point of mercury and melting point of gallium 2009.
EURAMET Project N° 1041 Comparison in gas media (absolute and gauge mode) in the range from 25 kPa up to 200 kPa 2009.
EURAMET Project N° 912 Developing primary dew-point standards 2009.
EUROMET-T-K7-2 Key Comparison of Water Triple Point Cells (Regional extension of CCT-K7) 2006.
EUROMET Project N° 782 The Advancement of TechnicalCompetence of Staff in Upcoming Laboratories in Humidity 2006.
EUROMET Project N° 758 Uncertainty in Humidity Measurements 2005.
EUROMET Project N° 844 Intercomparison of copper fixed-point cells by using Pt/Pd thermocouples 2005.
EUROMET Project N° 820
EUROMET-T-K4
Comparison of the realisations of the ITS-90 at the freezing points of Al (660,323 °C) and Ag (961,78 °C) 2004.
EUROMET Project N° 621 Key Comparisons in Humidity
(Dew/Frost-point Temperature – 50 to + 20°C)
2003.